Electric Rollerdoor PLUS with guide rails, Height 3.10 m

Optimum access to buildings

Electric Rollerdoors PLUS are driven by a motor integrated in the upper tubing and controlled through a switch. The additional centre tube increases the stability of the door, even with higher wind loads. This ensures a longer lifespan and operational reliability. By adding side guide rails, the door has an additional tight closure and can be opened even at light wind conditions. The door is sealed at the bottom with a bottom flap, compensating for any ground unevenness.

1. Steel tubing
All Electric Rollerdoors are delivered with 100 mm diameter tube

2. Establishing the dimensions
The width and height of the ordered Electric Rollerdoor dictate the clear opening dimensions of the door. The effective width is approx. 80 mm wider than the clear opening width. With electric roller doors, the drive is mounted on the right side. The clearance height reduces by 100 mm.

3. Fitting adjustment
Minimum width 2.40 m. The height can be varied by the positioning of the tube (superfluous net remains wrapped on the tube).

4. Bottom flap
Electric Rollerdoors are delivered with a bottom flap of 14 cm as standard. Bottom flaps of 34 cm and 51 cm can be supplied at a surcharge.

5. Guide rails
All Rollerdoors can be equipped with side guide rails. This ensures a tight closure of the door at the sides and allows the user to operate the door even at high wind speeds.

6. Colour
Special mesh available in green, blue, beige, grey, brown and black at no extra charge

The rollerdoor width has to be cut to size on site, for height adjustment any remainder can remain wound onto the upper tube.