Suitable for
  • Dairy cows
  • Cops
  • Calves
  • Sheep
  • Goats
  • Pigs
  • Alpacas
  • Wild boars
  • Wolves
Not suitable for:
  • Horses
  • Ponies
Do NOT use for horses! ① ② ③ ④

Spring gate set – the practical gate

A spring gate set consists of 4 parts: the gate handle, gate handle insulator, gate spring and the insulator for attaching the spring. PATURA spring gate sets contain an especially large spring and are suitable for all gate widths from 3 to 5 metres. In the opened condition the spring carries no current, contracts to about 25 cm and hangs down, with the handle, from the gate post. To shut the gate, the gate handle and spring are attached to the gate insulator on the other side of the gate. This allows the current to run inside the handle and through the spring.
  • The practical gate
  • Extends up to 5.00 m width
  • Complete with 1 gate handle, spring, gate handle insulator, ring insulator each

Mounting tip

Gates in the fence – 5 basic rules

  1. Keep the number of gates to a minimum, as gates are always a weak point in the fence.
  2. If possible, ensure that the gate is on level ground, as the gate area is always endangered by erosion.
  3. You will simplify the fence construction by putting the gates in the preferred corner areas.
  4. Never run current through the gate itself from one side to the other, rather use high voltage cable to pass it under the gate.
  5. Do not use spring gate sets in horse fences.

Practical tip

Use at least one Gate Set with ultra white spring for improved visability

More information
  • Package type: blister
  • Cargo type: Parcel goods
  • A spring gate set consists of 4 parts: the gate handle, gate handle insulator, gate spring and the insulator for attaching the spring. PATURA spring gate sets contain an especially large spring and are suitable for all gate widths from 3 to 5 metres. In the opened condition the spring carries no current, contracts to about 25 cm and hangs down, with the handle, from the gate post. To shut the gate, the gate handle and spring are attached to the gate insulator on the other side of the gate. This allows the current to run inside the handle and through the spring.